Buy Ubiquiti PowerBeam 5AC-300 from Hubtechshop, Nairobi Kenya
The Ubiquiti PowerBeam AC – PBE-5AC-300 is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The Ubiquiti PowerBeam AC (PBE-5AC-300) directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference.
Ubiquiti PowerBeam AC (PBE-5AC-300) Key Features
- Frequency – 5 GHz
- Gain – 22dBi
- Dish Reflector – 300mm
With its combination of focused beam directivity and RF isolation, the Ubiquiti PowerBeam AC (PBE-5AC-300) blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.
Ubiquiti PowerBeam AC (PBE-5AC-300) – Technical Specifications
General
- Processor Specs – Atheros MIPS 74Kc, 560 MHz
- Memory – 64 MB DDR2, 16 MB Flash
- Networking Interface – (1) 10/100/1000 Ethernet Port
- Wireless Approvals – FCC, IC, CE
- RoHS Compliance
- Dimensions – 364 x 364 x 276 mm (14.3 x 14.3 x 10.9″)
- Weight – 2.55 kg (5.62 lb)
- Power Supply – 24V, 0.5A Gigabit PoE
- Power Method – Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Supported Voltage Range – 20-26VDC
- Max. Power Consumption – 5.5W
- Gain – 22 dBi
- Operating Frequency
- Worldwide 5170 – 5875 MHz
- USA 5725 – 5850 MHz
Ubiquiti Networks PBE-5AC-300-US Specs
| Frequency | 5 GHz |
| Gain | 22 dBi |
| Processor | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 16 MB Flash |
| Networking Interface | 1 x 10/100/1000 Ethernet Port |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Power Supply | 24 V, 0.5 A Gigabit PoE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Voltage Range | 20-26 VDC |
| Power Consumption | 5.5 W |
| Operating Frequency | 5725 – 5850 MHz |
| Wind Loading | 200.2 N @ 200 km/h (45 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| LEDs | 1 x Power, 1 x LAN, 4 x WLAN |
| Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
| Channel Sizes | PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Mounting | Pole-Mount Kit Included |
| ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
| Operating Temperature | -40 to 158°F (-40 to 70°C) |
| Operating Humidity | 5 to 95% non-condensing |
| Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test | IEC 68-2-5 at 104°F (40°C), Equivalent: ETS 300 019-1-4 |
| Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
| Dimensions | 12.8 x 12.8 x 10.1″ (325 x 325 x 256 mm) |
| Weight | 2.65 lb (1.20 kg) |
Also see;
Ubiquiti Networks EP-R6 EDGEPOINT ROUTER 5PORT
The Ubiquiti IS-5AC IsoStation 5AC Outdoor 5GHz 14dBi WiFi PoE Access Point









Esther1 Mugethi –
The PowerBeam 5AC is ideal for CPE deployments requiring maximum performance airMAX AC 450+ Mbps 20+km