Metallic trunking knock out 100mm x 50mm available at Hubtechshop, Nairobi Kenya.

Brief description;

The metallic trunking knock out 100mm by 50mm is a protective enclosure or channel, a type of cable management system made from metal. It is used to house and protect electrical wiring, cables, or other types of conduits. The term “knock-out” in this context refers to a perforated or scored section in the trunking that can be easily removed. Therefore creating an opening for cable entry or exit. It can be used in electrical installations to contain and protect cables and wires while providing easy access for maintenance or future cable additions

The purpose of knock-outs is to simplify the installation process and reduce the need for custom modifications to the trunking. When a cable needs to pass through the trunking, the installer can knock out the pre-scored or perforated section to create a hole of the required size, ensuring a neat and secure cable entry or exit point. To remove a knock-out, an installer typically uses a screwdriver or similar tool. They then apply pressure at the scored or perforated section. This pressure causes the metal to break along the predetermined lines, creating a clean opening for the cable. Once the knock-out is removed, it cannot be reattached, so it’s essential to choose the right location and size.

After cables are installed, the metallic trunking is usually covered with a lid or cover. This secures and conceals the wiring, providing protection against physical damage and dust. The “knock-out” feature is a pre-engineered section of the metallic trunking . Where a portion of the enclosure’s sidewall or base is marked or perforated for easy removal. This feature is designed to allow electricians or installers to create openings in the trunking. For cable entry or exit points without the need for additional tools like saws or drills.

Also see;

Epson Label Works LW-300 Label Printer

Epson LabelWorks LW-400 Label Maker

FIBRE PATCH CODE MM Lc-Lc 3mtr