Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch
D-Link DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T switches is a line of managed switches, intended for networks Metro Ethernet (ETTX and FTTX) and corporate networks. Switches in this series are equipped with 8/16/24/48 port 10/100 Mbit / s Fast Ethernet, as well as combo port 1/2/4 Gigabit Ethernet / SFP. Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch made in the body width of 9.11 inches and are equipped with a passive cooling system, suitable for desktop use and for use in telecommunications and cabinets.
Switches DES-3200-26,28,28 / ME, 28F, 52 1U height designed for installation in 19-inch rack and provides a connection to copper or optics (24/48 port) at a speed of 100 Mbit / c. All devices have a series of practical design with 1, 2 or 4 combo ports of Gigabit Ethernet / SFP, which provide bandwidth of up to 4 Gb / s and allow to use these switches in a ring topology. Switch DES-3200-28 / ME is made specifically for use in telecommunication closets, where operators and engineers have access only to the front of the device and need quick troubleshooting.
All interfaces are located on the front of the DES-3200-28 / ME, including the connector for the power cable that meets the requirements of large networks. In addition, the switch DES-3200-28 / ME is equipped with a connector “dry contacts” for event detection and alarm. DES-3200-28F is the ideal solution for network deployment FTTX, allowing you to bring fiber optic line directly to the subscriber unit. Through the use of a switch DES-3200-28F fiber-optic communication lines to connect subscribers significantly increased transmission distance (up to 20 km) and excludes the impact of crosstalk inherent in copper.
D-Link DES-3200-52P 48-port meet the standards of PoE (Power over Ethernet-cable) IEEE 802.3af and IEEE 802.3at and provide power up to 15.4 watts per port and up to 30 watts on the first four / eight ports. Supports PoE / PoE + devices such as video / IP-phones, wireless access points and IP-cameras, lets you apply power to them directly from the switch to Ethernet-cable, which greatly simplifies network deployment. All switches DES-3200 series are equipped with 2 or 4 Gigabit ports SFP, which provides the ability to select the type of network topology, “ring”, “tree” or mixed type.
D-Link DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-TSpecifications;
- 48-Port POE 10/100 Base-T + 2 Port Gigabit Ethernet +2 Combo 10/100/1000 Base-T /100/1000 SFP
- Support IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
-Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) - Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)
- Resilience and Performance Enhancement features like MSTP, QoS and CoS
-Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet OAM - Dying Gasp, and D-Link Unidirectional Link Detection (DULD) functions
DES-3200 Series is a member of D-Link’s Layer 2 Managed Switch family designed for the Enterprise Networks and markets.
D-Link DES-3200-52P 48-port key features;
The DES-3200-10/18 comes in 9-inch desktop size and incorporates a fanless design suitable for ETTH deployment.
The DES-3200-28/52 provides copper connections on Fast Ethernet, an advantage when used for Metro Ethernet applications.
They also offer the beneficial design of 2/4 Gigabit/SFP Combo slots which provide up to 4 Gbps uplink bandwidth or dual Ethernet ring topology support.
The DES-3200-28P/52P are IEEE 802.3af /802.3at -compliant switches that provide 15.4W in every port and up to 30 W on a number of ports for Power over Ethernet (PoE) applications that require extra powers.
Safety and reliability
Resilience / performance
Traffic Control and Bandwidth
Multicasting
OAM
Management functions
Support for IPv6
D-Link DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T SPECIFICATION
Interface
- 48 10/100BASE-TX PoE
- 2 10/100/1000BASE-T
- 2 Combo 10/100/1000BASE-T or 100/1000 SFP
PoE Support
- Yes
PoE Budget
- 370W
PoE Ports
- 1-48
PoE+ Ports
- 1-8
Console Port
- RJ-45
Performance
Switching Capacity
- 17.6 Gbps
63-Byte Packet Forwarding Rate
- 13.1 Mpps
MAC Address Table-Size
- 16K Entries
SDRAM for CPU
- 128 MB
Packet Buffer
- 1.5MB
Flash Memory
- 32 MB
Jumbo Frame
- 12kb
Physical & Environmental
LEDs
- Power (Per Device)
- Console (Per Device)
- Link/Activity/Speed (Per Port)
Acoustic
- 39.3 dB at low speed
- 51.2 dB at high speed
Heat Dissipation
- 1608.196 BTU per hour
Power Input
- 100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply
Max Power Consumption
- 471.6 watts
Dimensions
- 17.36” x 12.13” x 1.732” (441 x 308 x 44 mm)
- 19-inch Standard Rack-Mount Width, 1U Height
Ventilation
- Smart Fans
Power Surge Protection
- All Ethernet ports support IEC61000-4-5 10/700us 6 KV surge protection
Operating Temperature
- 23°F to 112°F (-5° to 50°C)
Storage Temperature
- -40°F to 158°F(-40° to 70°C)
Operating Humidity
- 10% to 90% non-condensing
EMI
- FCC Class A
- CE Class A
- VCCI Class A
- IC
- C-Tick
Safety
- CE LVD
- UL/cUL
- CB
3rd Party Certifications
- MEF 21, IPv6 Ready Logo
MTBF
- 189,396 hours
- Software Features
Stackability
- Virtual Stacking: D-Link Single IP Management, Up to 32 units per Virtual Stack
L2 Features
- MAC Address Table: 8k
- Flow Control:
- 802.3x Flow Control
- HoL Blocking Prevention
- Loopback Detection
- Port Mirroring:
- Supports 1 Mirroring group
- Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring
- Ethernet Ring Protection Switching (ERPS)
L2 Protocol Tunneling
- Spanning Tree Protocols
- 802.1D STP
- BPDU Filtering
- 802.1w RSTP
- Root Restriction
- 802.1s MSTP
- 802.1Q-2005 MSTP
Link Aggregation
- Max. 14 groups (8 ports per group) Compliant with 802.1AX (formerly 802.3ad)
L2 Multicasting
- IGMP Snooping:
- IGMP v1/v2 Snooping, IGMP v3 awareness
- Supports 1K groups
- Port/Host-based IGMP Snooping Fast Leave
- Limited IP Multicasting:
- Up to 24 IGMP filtering profiles, 128 ranges per profile
- MLD Snooping:
- MLD v1, MLD v2 awareness
- Supports 1K groups
- IGMP Authentication
VLAN
- 802.1Q Tagged VLAN VLAN Group: Max. 4K VLAN
- Port-based VLAN
- MAC-based VLAN
- GVRP: Max. 255 dynamic VLANs
- 802.1v Protocol VLAN
- VLAN Trunking
- Asymmetric VLAN
- Double VLAN (Q-in-Q):
- Port-based Q-in-Q
- Selective Q-in-Q
- ISM VLAN
- VLAN Translation
L3 Features
- Gratuitous ARP
Quality of Service (QoS)
- Port-based Bandwidth Control: Ingress/Egress, min. granularity 8kbps)
- Flow-based Bandwidth Control:(Ingress, min. granularity 8 kbps))
- Per egress queue Bandwidth Control
- 4 queues per port
- DSCP
- 802.1p
- Queue Handling:
- Strict Priority
- Weighted Round Robin (WRR)
- Strict + WRR
- Remark 802.1p Priority Tag
- Remark ToS/DSCP Tag
- Bandwidth Control
- Flow Statistics
- Time-based QoS
- CoS Based on:
- Switch Port
- VLAN ID
- 802.1p Priority Queues
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- TOS
- DSCP
- Protocol Type
- TCP/UDP Port
- User-defined packet content
Access Control List (ACL)
- ACL based on: Switch Port
- VLAN ID
- 802.1p Priority Queues
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- ToS
- DSCP
- Protocol Type
- TCP/UDP Port
- User Defined Packet Content
- Up to 512 ingress access rules
- Time-based ACL
- ACL Statistics
- CPU Interface Filtering
Security
- SSH v2
- SSL v1/v2/v3
- Port Security: up to 64 MAC addresses per port
- Broadcast/Multicast/Unicast Storm Control
- IP-MAC-Port Binding (IMPB):
- ARP Inspection
- IP Inspection
- DHCP Snooping
- Traffic Segmentation
- D-Link Safeguard Engine
- DHCP Server Screening
- DHCP Client Filtering
- DoS Attack Prevention
- ARP Spoofing Prevention
- BPDU Attack Protection
AAA
- Guest VLAN
- RADIUS
- TACACS+
- XTACACS+
- Trusted Host
- RADIUS Accounting
- Two-level User Account
802.1X
- Port-based Access Control
- Host-based Access Control
- Dynamic VLAN Assignment
- Identity-driven security policy assignment: QOS, VLAN
MAC-based Access Control (MAC)
- Port-based Access Control Host-based Access Control
- Dynamic VLAN Assignment
- Authentication Database Failover
- Identity-driven security policy assignment: QoS, ACL, VLAN
Microsoft® NAP (IPv4/v6)
- Supports 802.1x NAP
- Supports DHCP NAP
Management
- Web-based GUI (Supports IPv4/v6) Command Line Interface (CLI)
- Telnet Server/Client (Supports IPv4/v6)
- TFTP Client (Supports IPv4/v6)
- ZModem
- SNMP v1/v2c/v3
- SNMP Traps
- System Log
- RMON v1: Supports 1,2,3,9 groups
- RMON v2: Supports ProbeConfig group
- BootP/DHCP Client
- DHCP Auto-Configuration
- The DHCP Relay
- DHCP Relay Option 12
- DHCP Relay Option 82
- PPPoE Circuit-ID Tag Insertion
- Dual Image
- CPU Monitoring
- SNTP
- LLDP
- Debug Command
- Password Encryption
SMTP
- Ping (Supports IPv4/v6)
- Traceroute (Supports IPv4)
- Command Logging
- ICMPv6
- Microsoft® NLB (Network Load Balancing) Support
OAM
- Cable Diagnostics
- 802.3ah Ethernet Link OAM
- Dying Gasp
- 802.1ag Connectivity Fault Management (CFM)
802.3ah D-Link Extension: D-Link Unidirectional Link Detection (DULD)
- MIB
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1157, 2571-2576 SNMP MIB
- The RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- The RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
- RFC 1493 Bridge MIB
- RFC 1757, 2819 RMON MIB
- The RFC 1907 SNMPv2 MIB
- RFC 2021 RMONv2 MIB
- RFC 2233, 2863 IF MIB
- The RFC 2618 RADIUS Authentication Client MIB
- RFC 2620 RADIUS Accounting Client MIB
- RFC 2674, 4363 802.1p MIB
- The RFC 2925 PING & TRACEROUTE MIB
- RFC 4188 Bridge MIB
IETF® Standard
- RFC 768 UDP
- RFC 783 TFTP
- The RFC 791 IP
- RFC 792, 2463, 4443 ICMP
- RFC 793 TCP
- The RFC 826 ARP
- RFC 854 Telnet
- RFC 951, 1542 BootP
- The RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 1492 TACACS
- RFC 1981 Path MTU Discovery for IPv6
- The RFC 2068 HTTP
- RFC 2460 IPv6
- RFC 2461, 4861 Neighbor Discovery for IPv6
- The RFC 2462, 4862 IPv6 Stateless Address Auto Configuration
- RFC 2463, 4443 ICMPv6
- RFC 2464 IPv6 Ethernet and definition
- The RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 Headers
- RFC 2544 Benchmarking Methodology for Network Interconnect Devices
- RFC 2571, 2572, 2573, 2574 SNMP
- The RFC 2866 RADIUS Accounting
- RFC 2893, 4213 IPv4/IPv6 dual stack function
- RFC 3513, 4291, IPv6 Addressing Architecture
Warranty
- Limited Lifetime
Also see;
D-Link 28-Port Fast Ethernet WebSmart PoE+ Switch
D-Link 48 Port Cat6 Unshielded Punch Down Patch Panel – Keystone Type – 2U
Reviews
There are no reviews yet.