Cisco Wireless-N Access Point Power Over Ethernet WAP121

Rated 5 out of 5 based on 1 customer rating

KSh15,000.00 + VAT

Buy Cisco Wireless-N Access Point Power Over Ethernet WAP121 from Hubtechshop, Nairobi Kenya

Visit our store and enjoy:

Genuine, brand new, sealed stock
Price-match against authorized dealers
Installation & configuration services available
Expert advice on compatibility with your network

SKU: TS3002 Category: Cisco

Description
Reviews (1)

Buy Cisco Wireless-N Access Point Power Over Ethernet WAP121 from Hubtechshop, Nairobi Kenya

The Cisco Wireless-N Access Point Power Over Ethernet WAP121 with Single Point Setup from Cisco makes it easy to extend the reach of an existing network. With a

simplified setup process a network administrator can easily deploy multiple access points and with the dedicated configuration wizard the

network settings can be easily monitored and managed.

Operating on the 2.4 GHz frequency and supporting 802.11b/g/n wireless networking standards this Cisco access point supports data transfer

rates of up to 300 Mbps. Simply attach the WAP121 AP to an existing network via the single Fast Ethernet port and begin distributing up to four

separate wireless connections with support for up to 4 SSIDs. Once configured, the wireless connection can be secured using WPA/WPA2/WEP

encryption standards along with access control management and rogue access point detection.Highly secure, high-speed 802.11n wireless networking

delivers enhanced throughput and extended range for bandwidth-intensive applications.

Wizard-based setup and configuration enables fast, simple deployment.Single Point Setup controllerless multi-access point deployment and management

technology makes configuration simple.Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection,

helps protect sensitive business information.Support for PoE enables easy installation without expensive additional wiring.Workgroup Bridge mode lets you

expand your network by wirelessly connecting to a second Ethernet network.Elegant, compact design with internal antennas and versatile mounting kit

enables installation on a ceiling, wall, or desktop.

Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.Power-saving sleep mode and port control

features help maximize energy efficiency.Secure guest access enables safe wireless connectivity for visitors.Support for IPv6 lets you deploy future networking

applications and operating systems without costly upgrades.Can be managed remotely using a web browser via the SNMP v3 protocol

Cisco Wireless-N Access Point Power Over Ethernet WAP121 Specs

General
Minimum Requirements	802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC Switch/router with PoE support or PoE injector when used with PoE Web-based configuration: Java-enabled web browser
Standards	IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Ports	LAN Fast Ethernet auto sensing, DC jack
Switch	Power button (on/off)
Button	Power (on/off) push button, Reset button
Cabling Type	Category 5e or better
Antenna	Internal antennas optimized for wall, ceiling, or desktop placement
LEDs	Power, WLAN, LAN
Operating System	Linux

Physical Interface
Ports	10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE
Power Supply	External 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
Button	Power (on/off) push button; Reset button
Lock	Slot for Kensington lock
LED	Power, Wireless, Ethernet

PoE
PoE	802.3af
Peak Power	6 W

Cisco Wireless-N Access Point Power Over Ethernet WAP121 Network
Supports	VLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing
Number of VLANs	1 management VLAN plus 4 VLANs for Service Set ID (SSID)
Multiple SSIDs	4
IPv6	IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc
Layer 2 Features	802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN

Security
Encryption	WPA/WPA2/WEP & Enterprise authentication
Access Control	Management access control list (ACL) plus MAC ACL
Secure Management	HTTPS
Wi-Fi Protected Setup	Soft WPS, no hardware push button
Broadcast System	SSID
Detection Functions	Rogue access point

Mounting Options
Options	Desktop installation; mounting bracket included for easy ceiling or wall mounting

Security
Lock	Kensington lock slot

Quality of Service (QoS)
QoS	Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)

Performance
Data Rate	Up to 300 Mbps data rate (real-world throughput will vary)
User support	Recommended up to 16 connected users, or 10 active users.

Configuration
Web User Interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management
Setup	Single Point
Access Point Management	Maximum per cluster: 4 Active clients per cluster: 40

Management & Protocols
Management Protocols	Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Event Logging	Event logging
Network Diagnostics	Logging and packet capture
Web firmware upgrade	Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)	DHCP client
Host	IPv6

Wireless
Frequency	Single-band 2.4 GHz
Radio Type	Single radio
Modulation Type	OFDM (Orthogonal Frequency Division Multiplexing)
Channels	1 to 13 (depending on country) Channels 1 through 11 (FCC) Channels 1 through 13 (ETSI)
Isolation	Wireless isolation between clients
Internal Antennas	Internal fixed PIFA antennas
Antenna Gain In dBi	2 dBi each antenna
Transmitted Power	802.11b @ 11 Mbps: 17 dBm 802.11g @ 54 Mbps: 13 dBm 802.11n @ HT20HT40, MCS15: 13 dBm
Receiver Sensitivity	802.11b: 11 Mbps @ -86 dBm 802.11g: 54 Mbps @ -71 dBm 802.11n: 300 Mbps @ -64 dBm
Multiple SSIDs	4
Supports	Wireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security
WMM	With unscheduled automatic power save and voice profile
Access Point Modes	Access Point mode, WDS bridging, Workgroup Bridge mode

Environmental
Power	12 VDC, 0.5 A input, and IEEE802.3af compliant PoE
Certifications	FCC class B, CE, IC, Wi-Fi
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-4 to 158°F (-20 to 70°C)
Operating Humidity	10 to 85% non-condensing
Storage Humidity	5 to 90% non-condensing
Mean Time Between Failures	531189 hours