-7%

Cisco Small Business WAP4410N Wireless-N Access Point – PoE/Advanced Security

Original price was: KSh28,000.00.Current price is: KSh26,000.00. + VAT

Buy Cisco Small Business WAP4410N Wireless-N Access Point – PoE/Advanced Security from Hubtechshop, Nairobi Kenya

Visit our store and enjoy:

Genuine, brand new, sealed stock
Price-match against authorized dealers
Installation & configuration services available
Expert advice on compatibility with your network

SKU: TS14526 Category: Cisco

Description
Reviews (0)

Buy Cisco Small Business WAP4410N Wireless-N Access Point – PoE/Advanced Security from Hubtechshop, Nairobi Kenya

Cisco Small Business WAP4410N

Buy Cisco Small Business WAP4410N Wireless-N Access Point – PoE/Advanced Security from Hubtechshop Kenya

Cisco Small Business WAP4410N Features

Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per access point for your small business

Easy installation and configuration via a web interface
Adjustable and removable dipole antennas with multiple-input, multiple-output (MIMO) 3×3 diversity
Gigabit Ethernet LAN interface
Supports PoE and external DC power
HTTP Redirect facilitates the display of a splash page on initial user access
IPv6 host support for managing the access point over IPv6
Multiple basic service set identifier (BSSID) support allows the creation of multiple secure wireless workgroups for users and guests
Service set identifier (SSID) to VLAN mapping maintains application security and quality across wireless and wired
WPS allows for simple and secure deployment of the wireless network
Logging via syslog, email, or local log
Wi-Fi Multimedia (WMM) wireless QoS support

Specifications

Table 1 lists the specifications, package contents, and minimum requirements for the Cisco WAP4410N Wireless-N Access Point.

Table 1. Specifications for the Cisco WAP4410N Wireless-N Access Point: PoE/Advanced Security


Specifications
Standards	Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM
Ports	Ethernet, Power
Buttons	Reset
Cabling type	Unshielded twisted pair (UTP) Category 5e or higher
LEDs	Power, Ethernet, Wireless, PoE
Operating system	Linux
Setup/Configuration
Web user interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management
Simple Network Management Protocol (SNMP) version	SNMP version 1, 2c
Event logging	– Also Event logging • Email logging • Remote syslog
Web firmware upgrade	Firmware upgradeable through web browser
Diagnostics.	Flash, RAM, LAN, WLAN
Dynamic Host Configuration Protocol (DHCP)	DHCP client
HTTP Redirect	Redirects initial user access to an external web server to display company logo or network usage policy
IPv6 host	• Support for management and control of access point over IPv6 • Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)
Network Capabilities
Multiple BSSID	Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points
VLANs	Supports 802.1q – up to 4 VLANs
SSID to VLAN mapping	Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains
Spanning Tree	Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system
Operating modes	Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode
Load balancing	Allows bandwidth control with user-defined CPU usage ratios
Auto-channel selection	On boot-up, the access point selects the least congested channel
802.11d regulatory domain	Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains
Security
WEP/WPA/WPA2	Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT
Access control	Wireless connection control: MAC-based
SSID broadcast	SSID broadcast enable/disable
Client isolation	Supports wireless client isolation between and within SSIDs
802.1X	Wireless clients can be authenticated through IEEE 802.1X
802.1X supplicant	Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network
RADIUS server	Up to 2 RADIUS servers can be configured for redundancy purposes
WPS	Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network
Rogue access point detection	New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network
Quality of Service
QoS	• 4 queues -802.1p VLAN priority • WMM wireless priority -Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS
Wireless
Spec/modulation	Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM
Channels	Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
Internal antennas	None
External antennas	3 (omnidirectional)
Transmit power	Transmit power @ normal temp range for FCC: 802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX 802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX 802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14, 11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0~5/8~13, 16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15, 21.5 dBm @ 3TX@MCS0~5/8~13, 17.5 dBm @ 3TX @ MCS6/14, 15.5 dBm @ 3TX @ MCS7/15 Transmit power @ normal temp range for ETSI: 11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX
Antenna gain in dBi	2
Receiver sensitivity	802.11.n: 300 Mbps at -69dBm The 802.11.g: 54 Mbps at -73dBm 802.11.b: 11 Mbps at -88dBm
Environmental
Dimensions W x H x D	6.69 x 6.69 x 1.60 in. (170 x 170 x 40.7 mm)
Weight	0.86 lb (39 kg)
Power	• 12V 1A DC input, and IEEE 802.3af compliant PoE • Max power draw: 10.1W
Certification	FCC, CE, IC
Operating temperature	32° to 104°F (0° to 40°C)
Storage temperature	-4° to 158°F (-20° to 70°C)
Operating humidity	10% to 85%, noncondensing
Storage humidity	5% to 90%, noncondensing
Package Contents
• Cisco WAP4410N Wireless-N Access Point with PoE • User guide on CD-ROM – Ethernet network cable • Power adapter -Product stands • Registration card
Minimum Requirements
-802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC • Switch/router with PoE support or PoE injector when used with PoE -Web-based configuration: Java-enabled web browser
Product Warranty
Limited lifetime hardware warranty with return to factory replacement.